Start inside the drawer.
Measure the narrowest internal width and depth. Check screws, curved corners and rails. This rectangular model assumes a grid aligned to the left rear corner.
GRIDFINITY / LAB 01 · SPACE RECOVERY
Don’t waste the
last millimeter.
Measure your drawer. Discover the gap. Make it yours.
MEASURE. RECOVER. CREATE.
42 × 42 mm / GRID SYSTEM
● BROWSER-BASED STUDIO
42 × 42 mm / GRID SYSTEM
● BROWSER-BASED STUDIO
42mm GRIDRECOVERABLE SPACE
A little gap. Three possibilities.
03 / SOLUTION STUDIOFrom measurement to making.
FIELD NOTES / 001—003A grid is only the beginning.
400 × 300 mm → 9 × 7 cells → a 22 mm right strip and 6 mm front strip. The front strip stops at the grid width so the corner is counted once.
Print a small promise first.
Clearance is applied on both sides. Download a test coupon first. Export STL directly or edit the OpenSCAD source. Inspect the model in your slicer; physical fit needs a real test.
Does this make standard Gridfinity bins?
These are independent edge accessories without a standard base, stacking lip, magnet pocket or screw hole. The 42 mm grid is a layout reference; no mechanical compatibility is certified.
Why is my full design export disabled?
Check the status message. A gap may be zero, the walls may leave no usable interior, or the design may exceed the selected printer bed. A short coupon can still be exported when it fits. Automatic segmentation is not included.
Are my measurements uploaded?
The tool keeps your current project in this browser when local storage is available. Design files are generated locally. Existing advertising services operate under their own privacy policies.